00-485 Airway- Intubator- Williams Type- 9cm- Disposable Plastic. Injection molded plastic- single use device. The Airway Intubator is cylindrical on the proximal half and open on the distal half of the lingual surface. The Airway Intubator is indicated for use as: (1) an oropharyngeal airway- (2) a means of intubating the trachea- and (3) a guide for fiber optic laryngoscope placement. Recommended for use with up to 7.5mm I.D. endotracheal tube. Packaging: 10/Box.

ANESTHESIA ASSOC.#00-381. MONASCOPE STETHOSCOPE. LARGE. RIGHT EAR. COMPLETE WITH SOUND TUBING AND FEMALE LUER CONNECTOR. COMFORTALE SINGLE C-SHAPED EAR PIECE FOR CONSTANT MONITORING OF THE PATIENT. MOLDED OF SUFFICIENT DUROMETER TO ACCURATELY REFLECT SOUND, YET SOFT ENOUGH TO ASSURE COMFORT. EACH.

Tooth Protector- Gardent- Adult (LF). Disposable soft white plastic. Adult size only. Unwrapped. Packaging: 50/Bag.

00-483 Connector- Flex Tubing- 5-1/2. Flexible Teflon Connector with 15mm male by 15mm female ends. The ends are threaded to screw into the convolutes of the tubing making an easy to assemble connection of different lengths. It is a long-lasting- lightweight- translucent- and heat sterilizable connector. Other lengths available upon request. 5-1/2" overall length. Packaging: 1/Each.

P-219 Gauge- Pressure- Replacement- 0-60 psi- 1/8. Replacement Gauge for 00-325 Jet Ventilator. Packaging: 1/Each.

Gauge Crystal- Replacement- fits P-219 on 00-325 Jet Vent. Replacement Cyrstal for Gauge for 00-325 Jet Ventilator. Packaging: 1/Each.

00-227 Adapter - Mask Elbow - Inhalant - 15mmM x 22mmM/15mmF x Metered Dose Can. Aluminum / Latex-Free. For use with metered dose canister (not supplied) for in-line bronchodilation with port to accept canister and cap. Machine end is 15mm male. Patient end is nominal 22mm male and 15mm female. Packaging: 1/Each.

00-295 / Respirometer - Digital - Complete w/ Sensor - Controller - Adapter - to 200 liters. With the large LCD readout display on the Model 295 Digital Respirometer the confusion of reading a mechanical respirometer dial is eliminated. The flow sensing unit has only one moving part, and is detachable from the control unit for ease of sterilization and cleaning. It may be washed, gas sterilized or cold sterilized. Comes complete as shown, ready to use with 9V battery and one (1) 22mm female x 22mm female adapter¸ Range: 0 - 200 liters¸ Measurement Type: Air/Gas volume flow (tidal volume)¸ Resolutions: .02 liter¸ Flow Rate: 5 lpm minimum/150 lpm maximum¸ Accuracy: ±5% over range, ±2% at calibration point¸ Resistance to flow: 2cm of water at 100 lpm. Packaging: 1/Each.

Peak Flow Meter - Standard Mini-Wright - 60-800 lpm (LF). Range-60 to 800 liters/minute. An inexpensive Peak-flow Meter designed primarily for domicile use and to provide an inexpensive form of self-monitoring by patients to give information about their response to treatment. A tubular sealed structure with a spring loaded piston and a longitudinal slot through which air escapes (these units cannot be repaired). Packaging: 1/Each.

Peak Flow Meter - Low Range Mini-Wright - 30-370 lpm (LF). Range-30 to 370 liters/minute. A low range version of the above Mini-WRIGHT developed specifically to accommodate those patients who are severely affected respiratory sufferers or pediatric patients who may be encouraged if they are able to move the pointer an appreciable distance up scale. An adapter which will accommodate a small mouth piece for use by children is also included. Packaging: 1/Each.

Respirometer - Haloscale Standard - to 100 liters - Concentric - Large Face. Incorporates concentric dials and an enlarged face for improved readability. Range to 100 liters. Short hand: 1 liter per revolution. Long hand: 100 liters per revolution. All Wright respirometers come with adapters - instruction manual- zippered case and harness. They feature convenient pushbutton style ON/OFF and RESET controls. Units are designed with case seals and material selections to withstand sterilization by low-temperature hydrogen peroxide gas plasma systems. Inlet and outlet on all respirometers are 22mm male fittings. The safe maximum flow for all Wright respirometers should not exceed 100 liters per minute. Packaging: 1/Each.

Respirometer Guard - fits Mark 8 - 14 - 25 - Haloscale compact & Physiological -Now LATEX FREE. A product designed to reduce physical damage due to dropping and abuse. Made out of attractive and durable - LATEX FREE Neoprene - that can be reliably sterilized. Shipped as a kit with two(2) case closure O-Rings, and is easily installed. Packaging: 1/Each.

00-196 Manometer Wall Mount - Swivel - fits 00-199 - 00-274 For use with #00-199 or #00-274 Manometer. Mounts to any flat surface and to thebase of the gauge. Provides 4 1/2" swivel arms w/180° dual pivot. Stainless and nylon.UOM: 1/Each.

00-486 Airway- Intubator- Williams Type- 10cm- Disposable Plastic. Injection molded plastic- single use device. The Airway Intubator is cylindrical on the proximal half and open on the distal half of the lingual surface. The Airway Intubator is indicated for use as: (1) an oropharyngeal airway- (2) a means of intubating the trachea- and (3) a guide for fiber optic laryngoscope placement. Recommended for use with up to 8.5mm I.D. endotracheal tube. Packaging: 10/Box.

Jet Ventilator- Complete- 5' Hi Press. Hose w/ O2 DISS x 20. A ventilating system for rigid-wall bronchoscopy- laryngeal micro-surgery- and emergency use. Consisting of 5" high pressure tubing with 02 DISS fitting- flow control valve- thumb control valve- pressure gauge- and 20" clear plastic tubing with Luer lock fitting for attachment of adapters and tubes. Packaging: 1/Each.

Lamp- Laryngoscope- Conventional- Large- Frosted. Replacement Laryngoscope Blade Lamp. Large size- frosted lens. Packaging: 1/ea