Steel, corrosion resisting overall, twist drill bit, 2x127mm. Packaging: 1/ea, 6ea/cs

Steel, corrosion resisting overall, twist drill bit, 2.4x127mm. Packaging: 1/ea, 6ea/cs

Steel, corrosion resisting overall, twist drill bit, 2.7x127mm. Packaging: 1/ea, 6ea/cs

Steel, corrosion resisting overall, twist drill bit, 3.2x127mm. Packaging: 1/ea, 6ea/cs

2.4 mm Drill-Tip Guide Wire, 12" (30 cm) long, no eyelet, sterile, single use . Packaging: 1/ea

2.5 mm Drill-Tip Guide Wire, 12" (30 cm) long, no eyelet, sterile, single use . Packaging: 1/ea 483-Endoscopic cannulated drill bit, 4.5mm. Packaging: 1/ea

Drill Tip Passing Pin, 2.4 mm x 15 in., Sterile, Single-Use, For Femoral Tunnel Depth Gauge. Packaging: 1/ea

Disposable Full Face Shield (complete face protection), Packaging: 50ea/bx

Disposable Half Face Shield (upper face protection), Packaging: 50ea/bx

The Meniscus Mender II, an outside-in suture technique that is designed for repairing the meniscus under direct arthroscopic monitoring. MMII Disposable Set. Packaging: 1/ea

The WHIPKNOT Soft Tissue Cinch is indicated for use in assisting in the harvest, preparation, and placementof soft tissue grafts during ligament reconstructive surgical procedures. The WHIPKNOT comes pre-assembled in a sterile pack that also includes a disposable cannula. The WHIPKNOT soft tissue cinch is a disposable device and should not be used as an implant. Kit includes 4 cinch and 1 cannula. Packaging: 1/ea

Drill Tip Wire, 1.6 dia. x 150 mm Length, Single-Use, Sterile, Made of Cobalt Chrome with a Fluted Tip to Provide Greater Stiffness and Easier Insertion, For Fracture or Arthrodesis Reduction. The Smith & Nephew Drill Wire Module introduces a new generation in K-wire technology. Standard Trocar Tip Wires are prone to bending, skiving and sometimes burning the bone on insertion. The drill tip design enables a more precise, faster insertion while generating less heat. Packaging: 1ea/bx

Tip Threaded Guide Pin, 3.2mm, callibrated. Sterile Package. Packaging: 1/ea

1.9 mm x 300 mm Guide Pin. Packaging: 1/ea, 6ea/bx

4.0 mm Cannulated Drill Bit. Packaging: 1/ea

K-wire periloc 1.5x150mm. Packaging: 1/ea, 6ea/bx

Calibrated drill with quick connect, 3.5mm Short Drill. Packaging; 1/ea

Calibrated Drills with Quick Connect, 2.7mm Cannulated Drill, 155mm.. Packaging: 1/ea

Drill, 2 dia. x 130 mm Length, Sterile, Single-Use, For VLP Foot Variable-Angle Locked Plating System, VLP Foot Percutaneous Calcaneus Plating System, VLP Foot Base Instrument Set. Packaging: 1/ea

Drill, 2.7 dia. x 130 mm Length, Sterile, Single-Use, For VLP Foot Variable-Angle Locked Plating System, VLP Foot Percutaneous Calcaneus Plating System, VLP Foot Base Instrument Set. Packaging: 1/ea

Drill, 3.5 dia. x 130 mm Length, Sterile, Single-Use, For VLP Foot Variable-Angle Locked Plating System, VLP Foot Percutaneous Calcaneus Plating System, VLP Foot Base Instrument Set. Packaging: 1/ea

1.5mm Drill bit w/AO QC, disposable. Packaging: 1/ea

1.8mm Drill bit w/AO QC, disposable. Packaging: 1/ea

2.0mm Drill bit w/AO QC, disposable. Packaging: 1/ea

2.5mm Drill bit w/AO QC, disposable. Packaging: 1/ea